All pull requests

Pull requests

• Calibration tab: mag_learn's fit against the GPS heading, the offsets learned in flight, the yaw trim

  #2845·MrScothh opened Oct 18, 2026·

  ·
  13

• Calibration and Blackbox tabs: heading from GPS (GSF)

  #2844·MrScothh opened Oct 18, 2026·

  ·
  9

• Onboard logging: a button for the mass storage mode, and the SD card box no longer under the Save toolbar

  #2843·MrScothh opened Oct 18, 2026·

  ·
  11

• Outputs tab: RPM telemetry and dynamic idle, and the lowest motor RPM in the 3", 5" and 7" presets

  #2842·MrScothh opened Oct 18, 2026·

  ·
  2

• Default tpa_breakpoint to 1500 and migrate old 1200 profiles

  #2841·sensei-hacker opened Oct 17, 2026Member·

  ·
  9

• Onboard logging: show the whole SD card's free space

  #2840·MrScothh opened Oct 16, 2026·

  ·
  5

• Configuration: I2C speed per bus, with the sensors on each bus

  #2835·MrScothh opened Oct 13, 2026·

  ·
  3

• Ports: an output pad for a UART's TX or RX

  For Discussion
  #2833·MrScothh opened Oct 10, 2026·

  ·

  · 10.1
  14

• Calibration and Blackbox tabs: in-flight compass learning (mag_learn)

  #2832·MrScothh opened Oct 10, 2026·

  ·
  11

• Mixer: the output map reserves no pad for a Smart ESC motor

  #2831·MrScothh opened Oct 9, 2026·

  ·
  5

• Receiver tab: ask for a serial port only while no port carries the receiver

  #2830·MrScothh opened Oct 9, 2026·

  ·
  10

• Outputs: show the Smart ESC port count only when it disagrees with the mixer

  #2829·MrScothh opened Oct 9, 2026·

  ·
  7

• Outputs: changing the protocol calls off a Smart ESC calibration

  #2828·MrScothh opened Oct 8, 2026·

  ·
  7

• GPS tab: keep the settings column to a third of the width

  Bugfix
  #2827·MrScothh opened Oct 7, 2026·

  ·

  · 10.1
  6

• tests: leave MSPCodes.js out of the MZTC sender scan on Windows too

  #2826·MrScothh opened Oct 6, 2026·

  ·
  5

• Consolidate confirm/alert/progress dialogs to jBox

  BugfixRefactoring
  #2825·sensei-hacker opened Oct 5, 2026Member·

  ·

  · 10.0
  18

• Do not change missions when selecting a waypoint in the all-missions view

  #2824·Raffi1202 opened Oct 4, 2026·

  ·
  5

• OSD tab: say what shows each layout in flight

  New Feature
  #2820·MrScothh opened Oct 1, 2026·

  ·

  · 10.1
  16

• GPS tab: list the satellites the receiver reports, as Betaflight does

  New Feature
  #2819·MrScothh opened Oct 1, 2026·

  ·

  · 10.1
  12

• Show the BEC voltage and offer its OSD element

  New Feature
  #2816·MrScothh opened Oct 1, 2026·

  ·

  · 11.0
  7

• Outputs: give the Smart ESC calibration its own box

  #2815·MrScothh opened Sep 30, 2026·

  ·

  · 10.0
  6

• GPS tab: presets for u-blox ZED-F9P and ZED-X20P

  #2813·Raffi1202 opened Sep 30, 2026·

  ·
  8

• Fix keyboard waypoint selection in Mission Control (TABS is not defined)

  #2812·Raffi1202 opened Sep 30, 2026·

  ·

  · 10.1
  9

• OSD: stop font upload when the FC cannot store the font

  #2811·Raffi1202 opened Sep 30, 2026·

  ·

  · 10.1
  9

• Allow switching tabs while a tab is still loading

  Bugfix
  #2806·b14ckyy opened Sep 26, 2026Collaborator·

  ·

  · 9.1.2
  9